
Ultra-Bright LED (Light Emitting Diode) - extremely efficient and durable light source compared to typical filament light bulbs.
Translucent Sliding On/Off switch - Large, translucent slide button is easy to use and allows more light to shine through!
Wide-angle beam of light - Non-flashing wide beam of light allows your dog to be seen more easily from a distance.
Keyring connector - Attach the light to your dog's collar. For small dogs, slip your dog's collar through the keyring and then fasten around neck. As your dog moves about, the light swings from side-to-side improving your dog's visibility from every direction.
Batteries included - this light is pre-installed with three AG3 button cell batteries.
Operation
Switch the light ON by sliding the button forward.
Turn the light OFF by sliding the button back.
Battery Replacement
Remove the three screws from the bottom of the light. Separate the two halves of the light. Carefully pry out the three batteries and replace with three new batteries. With the bottom half of the light placed on a flat surface, position the small ring of the keychain inside the slot at the screw hole. Gently place the top half of the light casing over the bottom half and press together. Replace the three screws securely but do not overtighten. Click Here for Illustrated Instructions
Specifications
Dimensions: 2" L x 1.25" W x 0.4" T (excluding keyring attachment)
Total weight: 15 grams (with batteries)
Body Material: plastic, silver paint.
Batteries: Three AG3, LR41, SR41, 392, or equivalent batteries.
© Copyright 2000-2008 Central Bay Technology Inc. ® It's a Dog's Light is a registered trademark.